Weight Sensors : TTS series

  • A series of custom order specifications. We can correspond from 1 unit.
  • I will ask the desired specifications and submit the appearance specification diagram.
  • – Mechanical Stopper, overload prevention function, can be mounted.
  • – Processing the sensor and tank fixing screw holes to arbitrary positions.
  • – Changed to high resistance (FEP) cable.
  • – Analog output specification (4 to 20 mA)
  • – Waterproof measures

Designation System

(A)Rated Capacity
010→100N≒10kgf
100→1000N≒100kgf
01T→10000N≒1tf
(※1N≒0.102kgf)

(B) Style
R→Round　L→Square

(C) Outlines
120→φ120mm（120mm□）

(D) Other Spec
CO→ Current Output Amp. Build in
SW□□□→Spec No.

A→ 120mm 150mm 200mm 260mm 300mm 420mm 500mm
Rated Capacity↓
100N 19 19 19 19 19    
300N 19 19 19 28 28    
500N 19 19 19 28 28    
1000N   25 25 28 28 32 32
2000N     28 28 32 32 32
5000N     32 32 32 32 32
8000N     32 32 32 32 32
10000N     32 32 32 32 36

※Above list of the number described B measurement as thick.
Available making over 500mm of A measurement. Please feel free to ask us particular request.

Specifications

 
Rated Capacity 100，300，500，1000，2000，5000，10000N
Rated Output 2mv/v±5％
Nonlinearity 0.1％R.O.
Hysteresis 0.1％R.O.
Repeatability 0.2％R.O.
Safe Overload 150％R.C.
Ultimate Overload 200％R.C.
Excitation, recommended 10V AC/DC
Excitation, maximum 20V AC/DC
Zero Balance ±10％R.O.
Compensated Temperature Range 0～50℃
Safe Temperature Range -10～60℃
Cable 5m 4core Shield Cable (5φ)
Cable Color Green：Output＋
Black（Blue）：Output－
Red：Input＋
White：Input－
Yellow：Shield
Cover Material SUS304
　
　
　
　
　
　
　
　
　
　
　
　
　

What is the difference between a weight sensor and an electronic balance? 17171 views

Electronic balances are highly accurate, lightweight, and suitable for measuring masses with a ratin

Please tell me how to install the weight sensor. 17106 views

TTS series, and LTS series are manufactured to the desired specifications, so tapping holes for fixi

Is it possible to tare? What should I do? 17078 views

You can tare from the amplifier display. For the MX-11 series, if you press and hold the leftmost ZE

Is there anything I should be careful about when handling and installing? 15340 views

The weight sensor is said to be able to apply a load of 100,000 times. Although it has a very long l

There is something wrong with the zero point. It moves every time it measures. 15325 views

There may be a problem with the load cell of the internal element. If a load exceeding the rated wei

No longer displays the exact weight. 15267 views

Please refer to the troubleshooting in the specifications or contact our staff. Frequently asked que

I want to know the measurement principle of weight sensors and load cells. 13799 views

Our weight sensor and load cell use a strain gauge for measurement. The resistance foil is attached

Is the environment in which it can be installed limited? 14010 views

Due to its intended use, weight sensors are often used in clean rooms or indoors. The temperature ra

Does the shape change when a load is applied? 13998 views

Although it depends on the sensor accuracy, the shape of the sensor sinks up to several mm when a ra

Can it be used only with the weight sensor and load cell? 13986 views

The output of the weight sensor is a weak voltage of several mV / V. Since it is necessary to amplif

What should I get the output from the sensor? 13047 views

The output from our weight sensor and load cell is several mv / v (at rated time). By using it as a