Weight Sensors : TGB series

  • Since this sensor has an inclination and the tank can be measured in an oblique state. So you can make full use of the inside liquid .
  • It can measure without leaving expensive liquid.
  • Ideal for measuring pressure tanks and gallon bottles.

Designation System

  Rated
Capacity		 A×B C Specifications
TGB-01A 500N 250×250 28 4～20mA output
TGB-02B 500N 250×350 28 4～20mA output
TGB-02A 100N 210×190 130 4～20mA output
TGB-02B 300N 210×190 130 4～20mA output

Specifications

Designation System
TGB-01
TGB-02
Rated Capacity 500N 100N
Rated Output 4～20mA(0～500N) 4～20mA(0～100N)(02B:0～300N)
Nonlinearity 0.25%
Hysteresis 0.25%
Repeatability 0.25%
Safe Overload 150%R.C.
Ultimate Overload 300％R.O.（Mechanical stopper）
Power Supply 24V
Compensated Temperature Range 0～45℃
Safe Temperature Range -10～60℃
Cable 3m　4core Shield Cable（5φ）
Cable Color Green：Output＋
Black（Blue）White：Output－
Red：Input＋
White：Input－
Yellow：Shield
over Material SUS304
　
　
　
　
　
　
　
　
　
　
　
　
　

What is the difference between a weight sensor and an electronic balance? 17238 views

Electronic balances are highly accurate, lightweight, and suitable for measuring masses with a ratin

Please tell me how to install the weight sensor. 17173 views

TTS series, and LTS series are manufactured to the desired specifications, so tapping holes for fixi

Is it possible to tare? What should I do? 17145 views

You can tare from the amplifier display. For the MX-11 series, if you press and hold the leftmost ZE

Is there anything I should be careful about when handling and installing? 15407 views

The weight sensor is said to be able to apply a load of 100,000 times. Although it has a very long l

There is something wrong with the zero point. It moves every time it measures. 15392 views

There may be a problem with the load cell of the internal element. If a load exceeding the rated wei

No longer displays the exact weight. 15334 views

Please refer to the troubleshooting in the specifications or contact our staff. Frequently asked que

I want to know the measurement principle of weight sensors and load cells. 13860 views

Our weight sensor and load cell use a strain gauge for measurement. The resistance foil is attached

Is the environment in which it can be installed limited? 14071 views

Due to its intended use, weight sensors are often used in clean rooms or indoors. The temperature ra

Does the shape change when a load is applied? 14059 views

Although it depends on the sensor accuracy, the shape of the sensor sinks up to several mm when a ra

Can it be used only with the weight sensor and load cell? 14047 views

The output of the weight sensor is a weak voltage of several mV / V. Since it is necessary to amplif

What should I get the output from the sensor? 13107 views

The output from our weight sensor and load cell is several mv / v (at rated time). By using it as a